python – Use ‘import module’ or ‘from module import’?

The Question :

449 people think this question is useful

I’ve tried to find a comprehensive guide on whether it is best to use import module or from module import. I’ve just started with Python and I’m trying to start off with best practices in mind.

Basically, I was hoping if anyone could share their experiences, what preferences other developers have and what’s the best way to avoid any gotchas down the road?

The Question Comments :
  • I just wanted to let you know, that the selected answer is wrong. It states that the difference is subjective whereas there is a difference. This could possibly lead to hard to detect bugs. See Michael Ray Lovetts answer.
  • Related post – Reasoning behind from … import … syntax in Python & ‘import module’ vs. ‘from module import function’
  • There’s a hell of a difference between importing specific named identifiers 'from module import X,Y,Z vs 'from module import *. The latter pollutes your namespace and can give unpredictable results depending on what’s going on in module. Worse still is doing from module import * with multiple modules.

The Answer 1

499 people think this answer is useful

The difference between import module and from module import foo is mainly subjective. Pick the one you like best and be consistent in your use of it. Here are some points to help you decide.

import module

  • Pros:
    • Less maintenance of your import statements. Don’t need to add any additional imports to start using another item from the module
  • Cons:
    • Typing in your code can be tedious and redundant (tedium can be minimized by using import module as mo then typing

from module import foo

  • Pros:
    • Less typing to use foo
    • More control over which items of a module can be accessed
  • Cons:
    • To use a new item from the module you have to update your import statement
    • You lose context about foo. For example, it’s less clear what ceil() does compared to math.ceil()

Either method is acceptable, but don’t use from module import *.

For any reasonable large set of code, if you import * you will likely be cementing it into the module, unable to be removed. This is because it is difficult to determine what items used in the code are coming from ‘module’, making it easy to get to the point where you think you don’t use the import any more but it’s extremely difficult to be sure.

The Answer 2

185 people think this answer is useful

There’s another detail here, not mentioned, related to writing to a module. Granted this may not be very common, but I’ve needed it from time to time.

Due to the way references and name binding works in Python, if you want to update some symbol in a module, say, from outside that module, and have other importing code “see” that change, you have to import foo a certain way. For example:

module foo:

bar = "apples"

module a:

import foo = "oranges"   # update bar inside foo module object

module b:

import foo           
print        # if executed after a's "" assignment, will print "oranges"

However, if you import symbol names instead of module names, this will not work.

For example, if I do this in module a:

from foo import bar
bar = "oranges"

No code outside of a will see bar as “oranges” because my setting of bar merely affected the name “bar” inside module a, it did not “reach into” the foo module object and update its “bar”.

The Answer 3

83 people think this answer is useful

Even though many people already explained about import vs import from, I want to try to explain a bit more about what happens under the hood, and where all the places it changes are.

import foo:

Imports foo, and creates a reference to that module in the current namespace. Then you need to define completed module path to access a particular attribute or method from inside the module.

E.g. but not bar

from foo import bar:

Imports foo, and creates references to all the members listed (bar). Does not set the variable foo.

E.g. bar but not baz or foo.baz

from foo import *:

Imports foo, and creates references to all public objects defined by that module in the current namespace (everything listed in __all__ if __all__ exists, otherwise everything that doesn’t start with _). Does not set the variable foo.

E.g. bar and baz but not _qux or foo._qux.

Now let’s see when we do import X.Y:

>>> import sys
>>> import os.path

Check sys.modules with name os and os.path:

>>> sys.modules['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> sys.modules['os.path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>

Check globals() and locals() namespace dicts with os and os.path:

>>> globals()['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> locals()['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> globals()['os.path']
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
KeyError: 'os.path'

From the above example we found that only os is inserted in the local and global namespace. So, we should be able to use:

>>> os
<module 'os' from
>>> os.path
<module 'posixpath' from

But not path.

>>> path
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'path' is not defined

Once you delete the os from locals() namespace, you won’t be able to access os as well as os.path even though they exist in sys.modules:

>>> del locals()['os']
>>> os
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'os' is not defined
>>> os.path
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'os' is not defined

Now let’s talk about import from:


>>> import sys
>>> from os import path

Check sys.modules with os and os.path:

>>> sys.modules['os']
<module 'os' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/os.pyc'>
>>> sys.modules['os.path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>

We found that in sys.modules we found as same as we did before by using import name

OK, let’s check how it looks like in locals() and globals() namespace dicts:

>>> globals()['path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> locals()['path']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> globals()['os']
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
KeyError: 'os'

You can access by using name path not by os.path:

>>> path
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> os.path
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'os' is not defined

Let’s delete ‘path’ from locals():

>>> del locals()['path']
>>> path
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
NameError: name 'path' is not defined

One final example using an alias:

>>> from os import path as HELL_BOY
>>> locals()['HELL_BOY']
<module 'posixpath' from '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> globals()['HELL_BOY']
<module 'posixpath' from /System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>

And no path defined:

>>> globals()['path']
Traceback (most recent call last):
 File "<stdin>", line 1, in <module>
KeyError: 'path'

The Answer 4

41 people think this answer is useful

Both ways are supported for a reason: there are times when one is more appropriate than the other.

  • import module: nice when you are using many bits from the module. drawback is that you’ll need to qualify each reference with the module name.

  • from module import ...: nice that imported items are usable directly without module name prefix. The drawback is that you must list each thing you use, and that it’s not clear in code where something came from.

Which to use depends on which makes the code clear and readable, and has more than a little to do with personal preference. I lean toward import module generally because in the code it’s very clear where an object or function came from. I use from module import ... when I’m using some object/function a lot in the code.

The Answer 5

35 people think this answer is useful

I personally always use

from package.subpackage.subsubpackage import module

and then access everything as


etc. The reason is that at the same time you have short invocation, and you clearly define the module namespace of each routine, something that is very useful if you have to search for usage of a given module in your source.

Needless to say, do not use the import *, because it pollutes your namespace and it does not tell you where a given function comes from (from which module)

Of course, you can run in trouble if you have the same module name for two different modules in two different packages, like

from package1.subpackage import module
from package2.subpackage import module

in this case, of course you run into troubles, but then there’s a strong hint that your package layout is flawed, and you have to rethink it.

The Answer 6

15 people think this answer is useful
import module

Is best when you will use many functions from the module.

from module import function

Is best when you want to avoid polluting the global namespace with all the functions and types from a module when you only need function.

The Answer 7

10 people think this answer is useful

I’ve just discovered one more subtle difference between these two methods.

If module foo uses a following import:

from itertools import count

Then module bar can by mistake use count as though it was defined in foo, not in itertools:

import foo

If foo uses:

import itertools

the mistake is still possible, but less likely to be made. bar needs to:

import foo

This caused some troubles to me. I had a module that by mistake imported an exception from a module that did not define it, only imported it from other module (using from module import SomeException). When the import was no longer needed and removed, the offending module was broken.

The Answer 8

10 people think this answer is useful

Here is another difference not mentioned. This is copied verbatim from

Note that when using

from package import item

the item can be either a submodule (or subpackage) of the package, or some other name defined in the package, like a function, class or variable. The import statement first tests whether the item is defined in the package; if not, it assumes it is a module and attempts to load it. If it fails to find it, an ImportError exception is raised.

Contrarily, when using syntax like

import item.subitem.subsubitem

each item except for the last must be a package; the last item can be a module or a package but can’t be a class or function or variable defined in the previous item.

The Answer 9

6 people think this answer is useful

Since I am also a beginner, I will be trying to explain this in a simple way: In Python, we have three types of import statements which are:

1. Generic imports:

import math

this type of import is my personal favorite, the only downside to this import technique is that if you need use any module’s function you must use the following syntax:


of course, it increases the typing effort but as a beginner, it will help you to keep track of module and function associated with it, (a good text editor will reduce the typing effort significantly and is recommended).

Typing effort can be further reduced by using this import statement:

import math as m

now, instead of using math.sqrt() you can use m.sqrt().

2. Function imports:

from math import sqrt

this type of import is best suited if your code only needs to access single or few functions from the module, but for using any new item from the module you have to update import statement.

3. Universal imports:

from math import * 

Although it reduces typing effort significantly but is not recommended because it will fill your code with various functions from the module and their name could conflict with the name of user-defined functions. example:

If you have a function of your very own named sqrt and you import math, your function is safe: there is your sqrt and there is math.sqrt. If you do from math import *, however, you have a problem: namely, two different functions with the exact same name. Source: Codecademy

The Answer 10

5 people think this answer is useful
import package
import module

With import, the token must be a module (a file containing Python commands) or a package (a folder in the sys.path containing a file

When there are subpackages:

import package1.package2.package
import package1.package2.module

the requirements for folder (package) or file (module) are the same, but the folder or file must be inside package2 which must be inside package1, and both package1 and package2 must contain files.

With the from style of import:

from package1.package2 import package
from package1.package2 import module

the package or module enters the namespace of the file containing the import statement as module (or package) instead of package1.package2.module. You can always bind to a more convenient name:

a = big_package_name.subpackage.even_longer_subpackage_name.function

Only the from style of import permits you to name a particular function or variable:

from package3.module import some_function

is allowed, but

import package3.module.some_function 

is not allowed.

The Answer 11

4 people think this answer is useful

To add to what people have said about from x import *: besides making it more difficult to tell where names came from, this throws off code checkers like Pylint. They will report those names as undefined variables.

The Answer 12

3 people think this answer is useful

My own answer to this depends mostly on first, how many different modules I’ll be using. If i’m only going to use one or two, I’ll often use fromimport since it makes for fewer keystrokes in the rest of the file, but if I’m going to make use of many different modules, I prefer just import because that means that each module reference is self-documenting. I can see where each symbol comes from without having to hunt around.

Usuaully I prefer the self documenting style of plain import and only change to from.. import when the number of times I have to type the module name grows above 10 to 20, even if there’s only one module being imported.

The Answer 13

3 people think this answer is useful

This is my directory structure of my current directory:


  1. The import statement remembers all intermediate names.
    These names have to be qualified:

    In[1]: import a.b.c
    In[2]: a
    Out[2]: <module 'a' (namespace)>
    In[3]: a.b
    Out[3]: <module 'a.b' (namespace)>
    In[4]: a.b.c
    Out[4]: <module 'a.b.c' (namespace)>
  2. The from ... import ... statement remembers only the imported name.
    This name must not be qualified:

    In[1]: from a.b import c
    In[2]: a
    NameError: name 'a' is not defined
    In[2]: a.b
    NameError: name 'a' is not defined
    In[3]: a.b.c
    NameError: name 'a' is not defined
    In[4]: c
    Out[4]: <module 'a.b.c' (namespace)>

  • Note: Of course, I restarted my Python console between steps 1 and 2.

The Answer 14

2 people think this answer is useful

One of the significant difference I found out which surprisingly no-one has talked about is that using plain import you can access private variable and private functions from the imported module, which isn’t possible with from-import statement.

enter image description here

Code in image:

public_variable = 42
_private_variable = 141
def public_function():
    print("I'm a public function! yay!")
def _private_function():
    print("Ain't nobody accessing me from another module...usually")

import settings
print (settings._private_variable)
print (settings.public_variable)

# Prints:
# 141
# 42
# I'm a public function! yay!
# Ain't nobody accessing me from another module...usually

from settings import *
#print (_private_variable) #doesn't work
print (public_variable)
#_private_function()   #doesn't work

The Answer 15

1 people think this answer is useful

As Jan Wrobel mentions, one aspect of the different imports is in which way the imports are disclosed.

Module mymath

from math import gcd

Use of mymath:

import mymath
mymath.gcd(30, 42)  # will work though maybe not expected

If I imported gcd only for internal use, not to disclose it to users of mymath, this can be inconvenient. I have this pretty often, and in most cases I want to “keep my modules clean”.

Apart from the proposal of Jan Wrobel to obscure this a bit more by using import math instead, I have started to hide imports from disclosure by using a leading underscore:

# for instance...
from math import gcd as _gcd
# or...
import math as _math

In larger projects this “best practice” allows my to exactly control what is disclosed to subsequent imports and what isn’t. This keeps my modules clean and pays back at a certain size of project.

The Answer 16

0 people think this answer is useful

Import Module – You don’t need additional efforts to fetch another thing from module. It has disadvantages such as redundant typing

Module Import From – Less typing &More control over which items of a module can be accessed.To use a new item from the module you have to update your import statement.

The Answer 17

0 people think this answer is useful

There are some builtin modules that contain mostly bare functions (base64, math, os, shutil, sys, time, …) and it is definitely a good practice to have these bare functions bound to some namespace and thus improve the readability of your code. Consider how more difficult is to understand the meaning of these functions without their namespace:

copysign(foo, bar)
copystat(foo, bar)

than when they are bound to some module:

math.copysign(foo, bar)
shutil.copystat(foo, bar)

Sometimes you even need the namespace to avoid conflicts between different modules (json.load vs. pickle.load)

On the other hand there are some modules that contain mostly classes (configparser, datetime, tempfile, zipfile, …) and many of them make their class names self-explanatory enough:

so there can be a debate whether using these classes with the additional module namespace in your code adds some new information or just lengthens the code.

The Answer 18

0 people think this answer is useful

I would like to add to this, there are somethings to consider during the import calls:

I have the following structure:


import mod.a
import mod.b as b
from mod import c
import d

dis.dis shows the difference:

  1           0 LOAD_CONST               0 (-1)
              3 LOAD_CONST               1 (None)
              6 IMPORT_NAME              0 (mod.a)
              9 STORE_NAME               1 (mod)

  2          12 LOAD_CONST               0 (-1)
             15 LOAD_CONST               1 (None)
             18 IMPORT_NAME              2 (b)
             21 STORE_NAME               2 (b)

  3          24 LOAD_CONST               0 (-1)
             27 LOAD_CONST               2 (('c',))
             30 IMPORT_NAME              1 (mod)
             33 IMPORT_FROM              3 (c)
             36 STORE_NAME               3 (c)
             39 POP_TOP

  4          40 LOAD_CONST               0 (-1)
             43 LOAD_CONST               1 (None)
             46 IMPORT_NAME              4 (mod.d)
             49 LOAD_ATTR                5 (d)
             52 STORE_NAME               5 (d)
             55 LOAD_CONST               1 (None)

In the end they look the same (STORE_NAME is result in each example), but this is worth noting if you need to consider the following four circular imports:


import foo.b
import foo.a

>>> import foo.a

This works


import bar.b as b
import bar.a as a

>>> import bar.a
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "bar\", line 1, in <module>
    import bar.b as b
  File "bar\", line 1, in <module>
    import bar.a as a
AttributeError: 'module' object has no attribute 'a'

No dice


from baz import b
from baz import a

>>> import baz.a
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "baz\", line 1, in <module>
    from baz import b
  File "baz\", line 1, in <module>
    from baz import a
ImportError: cannot import name a

Similar issue… but clearly from x import y is not the same as import import x.y as y


import b
import a

>>> import qux.a

This one also works

The Answer 19

0 people think this answer is useful

since many people answered here but i am just trying my best 🙂

  1. import module is best when you don’t know which item you have to import from module. In this way it may be difficult to debug when problem raises because you don’t know which item have problem.

  2. form module import <foo> is best when you know which item you require to import and also helpful in more controlling using importing specific item according to your need. Using this way debugging may be easy because you know which item you imported.

Add a Comment